Narang Medical Limited

The Super Deluxe Series Autoclaves are sturdily constructed in rustproof, heavy gauge aluminum for use in rugged condition. Its a unique vessel that generates steam under pressure and temperature between 120°c to 135°c. On reaching the right temperature the instruments are subject to a saturated steam environment for a pre-specified time which results in safe and guaranteed sterilization. Available in various models and sizes from 11liters capacity to 39 liters capacity to suit different application. These can be used on electricity as well as on any external heat source such as kerosene stove, gas burner, wood & charcoal.

Features and Benefits :
› All aluminium deep drawn seamless construction.
› Light, compact, portable, easy to use top loading autoclaves.
› Fast 20 min. sterilizing cycle at 121º c.
› Equipped with two stages over pressure protection system incorporating a calibrated continuous bleeding pressure stopcock and pressure release weight valve.
› Extended life gasket & heating element (ISI marked). › Equipped with heat resistant handles and steam release / control valve.
› For assurance of quality each autoclave is tested to the parameter of successful sterilization.
› Optional TST indicator stickers provide independent verification that the correct combination of temperature, steam & time has been achieved for successful sterilization.
› Pressure Gauge : Colour coded pressure gauge showing internal chamber conditions during the cycle.
› Sterilization zone in green colour is shown from 15 psi to 20 psi (OR 1.034 bar to 1.378 bar) which is equivalent to temperature of 121°c to 127°c. Dial size : 2.5". Dial show measurement in 2 units (i) kg/cm2 (ii) lb/inch2.
› Full scale dial of pressure gauge is 0-30 lb/ inch2 or 0-2 kg/ cm2. Caution zone in red colour.
› Inclusive of - inner & outer stand.
› Optional (to be ordered separately) - Inside container / baskets / dressing drums, timer and spares.

Construction: These autoclaves are made of 10 gauge aluminum. The drum is deep drawn & the ring on top is riveted. The lid is made by casting. Locking of lid by 6 nuts with rubber gasket seal in between (not metal to metal seal). Two safety valves, pressure gauge, flexible metal rubbing to exhaust air. Includes outer stand, inner aluminum container, inner tripod stand.

Construction: Superior quality & finish. All the following autoclaves are made of 8 Gauge aluminium. The drum is deep drawn & the ring on top is riveted. The lid is made by casting. Locking of lid by 6 nuts with rubber gasket seal in between (no metal to metal seal). Two safety valves, pressure gauge, flexible metal tubing to exhaust air. Includes outer stand, inner aluminium container, inner tripod stand.

Features
› Equipped with two stages "over pressure" protection system incorporating a calibrated continuous bleeding Pressure stopcock and pressure release weight valve.
› Pressure Gauge : Colour coded pressure gauge showing internal chamber conditions during the cycle. Sterilization zone in green colour is shown from 15 psi to 20 psi (or 1.034 bar to 1.378 bar) which is equivalent to temperature of 121°c to 127°c. Dial size : 2.5". Dial show measurement in 2 units (i) kg/cm2 (ii) lb/inch2. Full scale dial of pressure gauge is 0-30 lb/ inch2 or 0-2 kg/cm2. Caution zone in red colour.
› Equipped with steam release /control valve and flexible metal exhaust tube. › For assurance of quality each autoclave is tested to the parameter of successful sterilization.
› Optional "TST" indicator stickers provide independent verification that the correct combination of temperature, steam & time has been achieved for successful sterilization.

› All aluminum deep drawn seamless construction of base unit.
› Heavy cast aluminum lid with six wing nut.
› Easy to use top loading autoclaves.
› Fast 20 min. sterilizing cycle at 121º C.

Construction: These portable vertical autoclaves are made out of thick high quality (14 gauge) stainless steel sheet, deep drawn to cylindrical shape, having no joints and welding. Seamless construction allows no bacteria residue and free from dirt accumulation. Fitted with pressure gauge, safety valve (weight type), seam/pressure release cock, lid handle. Lid is similar to pressure cooker with locking over rubber gasket.

Features

› Stainless steel seamless construction.
› Portable vertical pressure type, easy to use top loading autoclaves.
› The steam pressure inside with autoclave can develop from 1.10 kgf / sq.cm (15 psi) to 1.25 kgf / sq.cm (18 psi).
› Equipped with top handle pressure gauge and pressure release valve.