I.V.
CANNULA WITH INJECTION PORT & WINGS, STERILE
- CE Marked
›
NEEDLE:
Siliconised, bevelled, back cut ground stainless
steel needle for smooth and painless venipuncture.
Made of Stainless Steel AISI304, diameter and
length according to ISO standard.
›
NEEDLE
HUB: All I.V.Cannulae have specially designed
needle hub to prevent any de-stabilisation and
bending of the needle during venipuncture. Specially
curved thumb guard for proper grip during insertion.
›
NEEDLE
COVER: Protects the needle and catheter
from contamination. Prevents accidental damage
to the needle and catheter.
›
CATHETER:
PTFE (Poly Tetra Fluoro Ethylene) / FEP catheter
is dual tapered, bevelled tip & siliconized
which offers high resistance to kinking. Minimum
resistance during insertion due to its lowest
coefficient of friction & improved tip design.
High chemical resistance and excellent bio compatibility.
Thin walled catheter allows maximum flow rate
for a specific gauge of Cannula. Optimum trim
distance. Choice between stripped radiopaque and
transparent catheter.
›
FLASH
BACK CHAMBER: Flash back chamber allows
monitoring of instantaneous flash of blood after
venipuncture confirming correct catheter placement.
Specially designed to prevent any spillage of
blood.
›
WINGS
(DS101 & DS105): Angled wings offer
easy fixation and prevent slipping & rolling
of cannula over the patients body.
›
INJECTION
PORT (DS101 ONLY): Provided with injection
site. Which has one way retreating valve (silicon
tube) to facilitate extra medication and to prevent
back flow. The Injection valve is provided with
specially designed cap incorporating a recessed
plug with a protective skirt to effectively prevent
contamination when the valve is not in use. It
offers safe and convenient method of atraumatic
administration of medicines. Colour coded to identify
the gauge of the needle.
›
The product is sterile and
individually packed in rigid blister sealed with
peel-open type medical grade paper. (Tyvek packing
available upon request). Disposable, Sterile,
non-toxic and Non-Pyrogenic. Each I.V. Cannula
is provided with a threaded stopper.
I.V.
CANNULA WITHOUT INJECTION PORT, WITHOUT WINGS, STERILE
Code
Size
DS110-16
16G
DS110-18
18G
DS110-20
20G
DS110-22
22G
DS110-24
24G
I.V. CANNULA
::
14G
16G
18G
20G
22G
24G
I.V.
CANNULAE
Size
Colour
I.D. in mm.
O.D.
in mm.
Length in mm.
Water Flow in ml./min.
14G
Orange
1.7
2.1
45
270
16G
Grey
1.3
1.7
45
180
17G
White
1.1
1.5
45
125
18G
Green
0.9
1.3
45
80
20G
Pink
0.8
1.1
32
54
22G
Blue
0.6
0.9
25
33
24G
Yellow
0.5
0.7
19
20
PRODUCT
FEATURES:
100% Safety: Our I.V. Cannulae can
be used safely without the risk of Thrombophlebitis.
It is made of Virgin P.T.F.E. (Ply Tetra Fluro Ethylene) Catheter,
one of the most biocompatible materials known to man.
Virgin P.T.F.E. Catheter: As P.T.F.E.
has the lowest coefficient of friction, our I.V. Cannulae
reduces the chances of sticking to vascular walls. The
P.T.F.E. clear catheter, designed and made double tapered
with a formed tip & siliconisation, offers lower resistance
during insertion, resulting in less trauma to the patient
and it avoids peel back effect. The thin walled catheter
has a large diameter, leading to 10% faster flow rate.
Improved Siliconised Needle Point:
Precisely honed point enables smoother penetrationn for rapid
closure after needle withdrawal and this also reduces fluid
seepage and Postdural Puncture Headache (PDPH.). Minimises
the chance of inadvertent nerve damage.
Soft And Smooth Needle Cover: Protects
the precisely honed needle point during handling.
Needle Hub: The extra thin walled
needle has a hub with a large crystal clear flash back chamber
indicates perfect and successful venepunture with blood entry.
The holding area of the needle hub is specially designed according
to thumb impression, resulting in easy insertion and firm
holding pressure of thumb on the smooth surface of the hub.
Fully covered needle hub stabilises the needle inside the
catheter to make insertion easier and safer.
Injection Port With A Snap Fit Protection
Cap: This allows injection of medicine during infusion.
Since the non-return valve can be opened only under pressure,
the valve does not open accidentally, thereby preventing contamination.
Flexible Grooved Wings: The wings
provide an angle between the plane of the wings and catheter,
resulting in easy and comfortable adjustment after catheter
insertion into the vein. The grooved wings helps ease
skin fixation and prominent gripping.
Unique Porous Filter: The needle
end is covered with a unique porous filter (fitted in needle
hub) resulting in a higher flow rate and quick easy confirmation
of correct vascular access. Avoids blood spillage and
prevents formation of air bubbles.
Threaded Stopper With Luer Lock:
This is the stopper used to stop the blood spillage after
infusion is stopped. The threads inside the stopper
tightens the stopper on main body and the luer lock confirms
the stoppage of blood spillage.
