Resuscitation Unit with Fixed Baby Cradle & Drawers (Premium) with Oxygen Regulator with hose pipe, place to keep cylinder, chain to hold oxygen cylinder, flow meter, humidifier bottle, silicone resuscitator with face masks 00, 01 & silicone airways sz. 000, 00, 0 & Laryngoscopes with miller blades sz. 0 & 1, with electrically operated suction unit with 2 autoclavable 500ml suction jar, with Microprocessor based temprature controller with 3 modes Skin/Air/Manual mode.
Technical Specification
Heater Box
Consists of Ceramic Infra Red Heater 650 Watts
The source box can be swivelled to take X-ray.
Due to temp. insulated cover on the heater box, its exterior surface remains cool even after long run.
The construction of the stainless steel reflector and Guard rail is such that the complete cleaning of heater & reflector is possible without any electrical shock hazards.
Halogen Examination Lamp (12 Volts, 50 Watts)
To provide accurate assessment of Infant colour and sufficient illumination during procedures.
Baby Tray (Stainless Steel)
Clear acrylic collapsible side panels .
Stainless steel baby tray with transparent slot to incorporate the facility of under surface phototherapy.
Acrylic tray and cushion mattress with head up/down facility.
Acrylic X-ray tray with X-ray guide for positioning the cassette.
The design aspects also allow ease of dismantling baby care area during cleaning or fumigation.
Essential Attachments
Lower Shelf and 3 Drawer Storage Cabinet.
Side Mounted Monitor tray.
Pole for Syringe Pump / Infusion Pump.
S.S. IV Stand.
Oxygenation : Oxygen regulator with Hose pipe, Place to keep Cylinder, Chain to hold Oxygen Cylinder, Flow meter, Humidifier bottle, Silicone Patient Tubing, Manual Silicone Resuscitator 250ml with 00 & 01 size mask.
Suction : Electrically operated low pressure Suction unit with 2 Autoclavable 500 ml suction jars, Regulator, Suction gauge and silicone tubing.
For Skin / Air / Manual mode, following are the feature:
Control Modes: Skin / Air / Manual. Range: Skin control: 34 to 38 ˚C Air control: Room temp. to 39˚ C" Resolution: 0.1˚ C Accuracy: ± 0.2˚ C Display: 1” bright skin & air temp.(7 segment LED)
% of heater output (bar graph)" Status: On LED Timer: Timer / APGAR Timer/Baby Attend Manual mode: Time Programmable
Heater output settable
Over temp. cut-off Alarm: Auto audio alarm mute, Mute time programmable Safety alarms: ON LED
The mentioned are default limit, can be set or alter as per requirement:
Skin Mode.
- Skin High 0.5˚C
- Skin Low 0.5˚C
- Under range (<34˚C)
- Over range (>38˚C)
Resuscitation Unit with Fixed Baby Cradle & Drawers (Premium) with Oxygen Regulator with hose pipe, place to keep cylinder, chain to hold oxygen cylinder, flow meter, humidifier bottle, silicone resuscitator with face masks 00, 01 & silicone airways sz. 000, 00, 0 & Laryngoscopes with miller blades sz. 0 & 1, with electrically operated suction unit with 2 autoclavable 500ml suction jar, with Microprocessor based temprature controller with 3 modes Skin/Air/Manual mode.
Technical Specification
Heater Box
Consists of Ceramic Infra Red Heater 650 Watts
The source box can be swivelled to take X-ray.
Due to temp. insulated cover on the heater box, its exterior surface remains cool even after long run.
The construction of the stainless steel reflector and Guard rail is such that the complete cleaning of heater & reflector is possible without any electrical shock hazards.
Halogen Examination Lamp (12 Volts, 50 Watts)
To provide accurate assessment of Infant colour and sufficient illumination during procedures.
Baby Tray (Stainless Steel)
Clear acrylic collapsible side panels .
Stainless steel baby tray with transparent slot to incorporate the facility of under surface phototherapy.
Acrylic tray and cushion mattress with head up/down facility.
Acrylic X-ray tray with X-ray guide for positioning the cassette.
The design aspects also allow ease of dismantling baby care area during cleaning or fumigation.
Essential Attachments
Lower Shelf and 3 Drawer Storage Cabinet.
Side Mounted Monitor tray.
Pole for Syringe Pump / Infusion Pump.
S.S. IV Stand.
Oxygenation : Oxygen regulator with Hose pipe, Place to keep Cylinder, Chain to hold Oxygen Cylinder, Flow meter, Humidifier bottle, Silicone Patient Tubing, Manual Silicone Resuscitator 250ml with 00 & 01 size mask.
Suction : Electrically operated low pressure Suction unit with 2 Autoclavable 500 ml suction jars, Regulator, Suction gauge and silicone tubing.
For Skin / Manual mode, following are the feature:
Control Modes: Skin / Manual. Range: Skin control: 34 to 38 ˚C Resolution: 0.1˚ C Accuracy: ± 0.2˚ C Display: 1” bright skin & air temp.(7 segment LED)
% of heater output (bar graph)" Status: On LED Timer: Timer / APGAR Manual mode: Time Programmable
Heater output settable
Over temp. cut-off Alarm: Auto audio alarm mute, Mute time programmable Safety alarms: ON LED
The mentioned are default limit, can be set or alter as per requirement:
Resuscitation Unit with Fixed Baby Cradle & Drawers (Premium) with Oxygen Regulator with hose pipe, place to keep cylinder, chain to hold oxygen cylinder, flow meter, humidifier bottle, silicone resuscitator with face masks 00, 01 & silicone airways sz. 000, 00, 0 & Laryngoscopes with miller blades sz. 0 & 1, with electrically operated suction unit with 2 autoclavable 500ml suction jar, with Microprocessor based temprature controller with 3 modes Skin/Air/Manual mode.
This is mobile Neonatal Resuscitation Unit mounted on wheels with fixed baby cradle & lower shelf along with facility of Oxygenation, Suction and Intubation
Technical Specification
Heater Box
Consists of Ceramic Infra Red Heater 650 Watts
The source box can be swivelled to take X-ray.
Due to temp. insulated cover on the heater box, its exterior surface remains cool even after long run.
The construction of the stainless steel reflector and Guard rail is such that the complete cleaning of heater & reflector is possible without any electrical shock hazards.
Halogen Examination Lamp (12 Volts, 50 Watts)
To provide accurate assessment of Infant colour and sufficient illumination during procedures.
Baby Tray (Stainless Steel)
Clear acrylic collapsible side panels .
Stainless steel baby tray with transparent slot to incorporate the facility of under surface phototherapy.
Acrylic tray and cushion mattress with head up/down facility.
Acrylic X-ray tray with X-ray guide for positioning the cassette.
The design aspects also allow ease of dismantling baby care area during cleaning or fumigation.
Essential Attachments
Lower Shelf and 3 Drawer Storage Cabinet.
Side Mounted Monitor tray.
Pole for Syringe Pump / Infusion Pump.
S.S. IV Stand.
Oxygenation : Oxygen regulator with Hose pipe, Place to keep Cylinder, Chain to hold Oxygen Cylinder, Flow meter, Humidifier bottle, Silicone Patient Tubing, Manual Silicone Resuscitator 250ml with 00 & 01 size mask.
Suction : Electrically operated low pressure Suction unit with 2 Autoclavable 500 ml suction jars, Regulator, Suction gauge and silicone tubing.
For Skin / Manual mode, following are the feature:
Control Modes: Skin / Manual. Range: Skin control: 34 to 38 ˚C Resolution: 0.1˚ C Accuracy: ± 0.2˚ C Display: 1” bright skin & air temp.(7 segment LED)
% of heater output (bar graph)" Status: On LED Timer: Timer / APGAR Manual mode: Time Programmable
Heater output settable
Over temp. cut-off Alarm: Auto audio alarm mute, Mute time programmable Safety alarms: ON LED
The mentioned are default limit, can be set or alter as per requirement:
Resuscitation Unit with Fixed Baby Cradle & Drawers (Premium) with Oxygen Regulator with hose pipe, place to keep cylinder, chain to hold oxygen cylinder, flow meter, humidifier bottle, silicone resuscitator with face masks 00, 01 & silicone airways sz. 000, 00, 0 & Laryngoscopes with miller blades sz. 0 & 1, with electrically operated suction unit with 2 autoclavable 500ml suction jar, with Microprocessor based temprature controller with 3 modes Skin/Air/Manual mode.
This is mobile Neonatal Resuscitation Unit mounted on wheels with fixed baby cradle & lower shelf along with facility of Oxygenation, Suction and Intubation.
Technical Specification
Heater Box
Consists of Ceramic Infra Red Heater 650 Watts
The source box can be swivelled to take X-ray.
Due to temp. insulated cover on the heater box, its exterior surface remains cool even after long run.
The construction of the stainless steel reflector and Guard rail is such that the complete cleaning of heater & reflector is possible without any electrical shock hazards.
Halogen Examination Lamp (12 Volts, 50 Watts)
To provide accurate assessment of Infant colour and sufficient illumination during procedures.
Baby Tray (Stainless Steel)
Clear acrylic collapsible side panels .
Stainless steel baby tray with transparent slot to incorporate the facility of under surface phototherapy.
Acrylic tray and cushion mattress with head up/down facility.
Acrylic X-ray tray with X-ray guide for positioning the cassette.
The design aspects also allow ease of dismantling baby care area during cleaning or fumigation.
Essential Attachments
Lower Shelf and 3 Drawer Storage Cabinet.
Side Mounted Monitor tray.
Pole for Syringe Pump / Infusion Pump.
S.S. IV Stand.
Oxygenation : Oxygen regulator with Hose pipe, Place to keep Cylinder, Chain to hold Oxygen Cylinder, Flow meter, Humidifier bottle, Silicone Patient Tubing, Manual Silicone Resuscitator 250ml with 00 & 01 size mask.
Suction : Electrically operated low pressure Suction unit with 2 Autoclavable 500 ml suction jars, Regulator, Suction gauge and silicone tubing.
For Skin / Air / Manual mode, following are the feature:
Control Modes: Skin / Air / Manual. Range: Skin control: 34 to 38 ˚C Air control: Room temp. to 39˚ C" Resolution: 0.1˚ C Accuracy: ± 0.2˚ C Display: 1” bright skin & air temp.(7 segment LED)
% of heater output (bar graph)" Status: On LED Timer: Timer / APGAR Timer/Baby Attend Manual mode: Time Programmable
Heater output settable
Over temp. cut-off Alarm: Auto audio alarm mute, Mute time programmable Safety alarms: ON LED
The mentioned are default limit, can be set or alter as per requirement:
Skin Mode.
- Skin High 0.5˚C
- Skin Low 0.5˚C
- Under range (<34˚C)
- Over range (>38˚C)
Resuscitation Unit with Fixed Baby Cradle & Drawers (Premium) with Oxygen Regulator with hose pipe, place to keep cylinder, chain to hold oxygen cylinder, flow meter, humidifier bottle, silicone resuscitator with face masks 00, 01 & silicone airways sz. 000, 00, 0 & Laryngoscopes with miller blades sz. 0 & 1, with electrically operated suction unit with 2 autoclavable 500ml suction jar, with Microprocessor based temprature controller with 3 modes Skin/Air/Manual mode.
Technical Specification
Heater Box
Consists of Ceramic Infra Red Heater 650 Watts
Metallic Heater Box.
The construction of the stainless steel reflector and Guard rail is such that the complete cleaning of heater & reflector is possible without any electrical shock hazards.
Halogen Examination Lamp (12 Volts, 50 Watts)
To provide accurate assessment of Infant colour and sufficient illumination during procedures.
Baby Tray (Stainless Steel)
Clear acrylic collapsible side panels .
Stainless steel baby tray with transparent slot to incorporate the facility of under surface phototherapy.
Acrylic tray and cushion mattress with head up/down facility.
Acrylic X-ray tray with X-ray guide for positioning the cassette.
The design aspects also allow ease of dismantling baby care area during cleaning or fumigation.
Essential Attachments
Lower Shelf and 3 Drawer Storage Cabinet.
S.S. IV Stand.
Oxygenation : Oxygen regulator with Hose pipe, Place to keep Cylinder, Chain to hold Oxygen Cylinder, Flow meter, Humidifier bottle, Silicone Patient Tubing, Manual Silicone Resuscitator 250ml with 00 & 01 size mask.
Suction : Electrically operated low pressure Suction unit with 2 Autoclavable 500 ml suction jars, Regulator, Suction gauge and silicone tubing.
For Skin / Manual mode, following are the feature:
Control Modes: Skin / Manual. Range: Skin control: 34 to 38 ˚C Resolution: 0.1˚ C Accuracy: ± 0.2˚ C Display: 1” bright skin & air temp.(7 segment LED)
% of heater output (bar graph)" Status: On LED Timer: Timer / APGAR Manual mode: Time Programmable
Heater output settable
Over temp. cut-off Alarm: Auto audio alarm mute, Mute time programmable Safety alarms: ON LED
The mentioned are default limit, can be set or alter as per requirement:
Resuscitation Unit with Fixed Baby Cradle & Drawers (Premium) with Oxygen Regulator with hose pipe, place to keep cylinder, chain to hold oxygen cylinder, flow meter, humidifier bottle, silicone resuscitator with face masks 00, 01 & silicone airways sz. 000, 00, 0 & Laryngoscopes with miller blades sz. 0 & 1, with electrically operated suction unit with 2 autoclavable 500ml suction jar, with Microprocessor based temprature controller with 3 modes Skin/Air/Manual mode.
Technical Specification
Heater Box
Consists of Ceramic Infra Red Heater 650 Watts
Metallic Heater Box.
The construction of the stainless steel reflector and Guard rail is such that the complete cleaning of heater & reflector is possible without any electrical shock hazards.
Halogen Examination Lamp (12 Volts, 50 Watts)
To provide accurate assessment of Infant colour and sufficient illumination during procedures.
Baby Tray (Stainless Steel)
Clear acrylic collapsible side panels .
Stainless steel baby tray with transparent slot to incorporate the facility of under surface phototherapy.
Acrylic tray and cushion mattress with head up/down facility.
Acrylic X-ray tray with X-ray guide for positioning the cassette.
The design aspects also allow ease of dismantling baby care area during cleaning or fumigation.
Essential Attachments
Lower Shelf and 3 Drawer Storage Cabinet.
S.S. IV Stand.
Oxygenation : Oxygen regulator with Hose pipe, Place to keep Cylinder, Chain to hold Oxygen Cylinder, Flow meter, Humidifier bottle, Silicone Patient Tubing, Manual Silicone Resuscitator 250ml with 00 & 01 size mask.
Suction : Electrically operated low pressure Suction unit with 2 Autoclavable 500 ml suction jars, Regulator, Suction gauge and silicone tubing.
For Skin / Air / Manual mode, following are the feature:
Control Modes: Skin / Air / Manual. Range: Skin control: 34 to 38 ˚C Air control: Room temp. to 39˚ C" Resolution: 0.1˚ C Accuracy: ± 0.2˚ C Display: 1” bright skin & air temp.(7 segment LED)
% of heater output (bar graph)" Status: On LED Timer: Timer / APGAR Timer/Baby Attend Manual mode: Time Programmable
Heater output settable
Over temp. cut-off Alarm: Auto audio alarm mute, Mute time programmable Safety alarms: ON LED
The mentioned are default limit, can be set or alter as per requirement:
Skin Mode.
- Skin High 0.5˚C
- Skin Low 0.5˚C
- Under range (<34˚C)
- Over range (>38˚C)
