Narang Medical Limited

These are mobile Warmer mounted on wheels with fixed baby cradle, lower shelf and 3 drawers storage Cabinet.
Technical Specification
Heater Box
› Consists of Ceramic Infra Red Heater 650 Watts,
› The source box can be swivelled to take X-ray
› Due to temp. insulated cover on the heater box, its exterior surface remains cool even after long run
› The construction of the stainless steel reflector and Guard rail is such that the complete cleaning of heater & reflector is possible without any electrical shock hazards
Halogen Examination Lamp (12 Volts, 50 Watts)
To provide accurate assessment of Infant colour and sufficient illumination during procedures
Baby Tray (Stainless Steel)
› Clear acrylic collapsible side panels
› Stainless steel baby tray with transparent slot to incorporate the facility of under surface phototherapy
› Acrylic tray and cushion mattress with head up/down facility
› Acrylic X-ray tray with X-ray guide for positioning the cassette
› The design aspects also allow ease of dismantling baby care area during cleaning or fumigation
Essential Attachments
› Lower Shelf and 3 Drawer Storage Cabinet
› Side Mounted Monitor tray
› Pole for Syringe Pump / Infusion Pump
› S.S. IV Stand.
For Skin / Air / Manual mode, following are the feature:
Control Modes: Skin / Manual
Range: Skin control: 34 to 38 ˚C
Resolution: 0.1˚ C
Accuracy: ± 0.2˚ C
Display: 1” bright skin & air temp.(7 segment LED)
            % of heater output (bar graph)"
Status: On LED
Timer: Timer / APGAR
Manual mode: Time Programmable
                     Heater output settable
                     Over temp. cut-off
Alarm: Auto audio alarm mute, Mute time programmable
Safety alarms: ON LED
The mentioned are default limit, can be set or alter as per requirement:
1.  Skin High 0.5˚C
2. Skin Low 0.5˚C
3. Under range (<34˚C)
4. Over range (>38˚C)
5. Heater Failure
6. Power control failure
7. Probe and power failure alarm"

These are mobile Warmer mounted on wheels with fixed baby cradle, lower shelf and 3 drawers storage Cabinet.
Technical Specification
Heater Box
› Consists of Ceramic Infra Red Heater 650 Watts,
› The source box can be swivelled to take X-ray
› Due to temp. insulated cover on the heater box, its exterior surface remains cool even after long run
› The construction of the stainless steel reflector and Guard rail is such that the complete cleaning of heater & reflector is possible without any electrical shock hazards
Halogen Examination Lamp (12 Volts, 50 Watts)
To provide accurate assessment of Infant colour and sufficient illumination during procedures
Baby Tray (Stainless Steel)
› Clear acrylic collapsible side panels
› Stainless steel baby tray with transparent slot to incorporate the facility of under surface phototherapy
› Acrylic tray and cushion mattress with head up/down facility
› Acrylic X-ray tray with X-ray guide for positioning the cassette
› The design aspects also allow ease of dismantling baby care area during cleaning or fumigation
Essential Attachments
› Lower Shelf and 3 Drawer Storage Cabinet
› Side Mounted Monitor tray
› Pole for Syringe Pump / Infusion Pump
› S.S. IV Stand.
For Skin / Air / Manual mode, following are the feature:
Control Modes: Skin / Air / Manual
Range: Skin control: 34 to 38 ˚C
           Air control: Room temp. to 39˚ C"
Resolution: 0.1˚ C
Accuracy: ± 0.2˚ C
Display: 1” bright skin & air temp.(7 segment LED)
            % of heater output (bar graph)"
Status: On LCD
Control Mode & Set temp
Timer: Timer / APGAR Timer/Baby Attend
Manual mode: Time Programmable
                     Heater output settable
                     Over temp. cut-off
Alarm: Auto audio alarm mute, Mute time programmable
Safety alarms: ON LCD
The mentioned are default limit, can be set or alter as per requirement:
1. Skin Mode
    - Skin High 0.5˚C
    - Skin Low 0.5 ˚ C
    - Under range (<34˚C)
    - Over range (>38˚C)
2. Air Mode
    - Air high 1.5˚C
    - Low 3.0˚C
    - Over range
3. Heater Failure
4. Power Control Failure
5. Probe & Power failure alarm

This is mobile Warmer mounted on wheels with fixed baby cradle.
Mechanical Specification
Heater Box
› Consists of Ceramic Infra Red Heater 650 Watts.
› The source box can be swiveled to take X-ray
› Due to temp. insulated cover on the heater box, its exterior surface remains cool even after long run
› The construction of the stainless steel reflector and guard rail is such that the complete cleaning of heater & reflector is possible without any electrical shock hazards
Halogen Examination Lamp (12 Volts, 50 Watts)
To provide accurate assessment of Infant colour and sufficient illumination during procedures
Baby Tray (Stainless Steel)
› Clear acrylic collapsible side panels
› Stainless steel baby tray with transparent slot to Incorporate the facility of undersurface phototherapy
› Acrylic tray and cushion mattress with head up/down facility
› Acrylic X-ray tray with X-ray guide for positioning the cassette
› The design aspects also allow easy of dismantling baby care area during cleaning or fumigation
Essential Attachments
› 2 Lower Shelves
› Side Mounted Monitor tray, Pole for Syringe Pump / Infusion Pump & S.S. IV Stand.
For Skin /  Manual mode, following are the feature:
Control Modes: Skin / Manual
Range: Skin control: 34 to 38 ˚C
Resolution: 0.1˚ C
Accuracy: ± 0.2˚ C
Display: 1” bright skin & air temp.(7 segment LED)
            % of heater output (bar graph)"
Status: On LED
Timer: Timer / APGAR
Manual mode: Time Programmable
                     Heater output settable
                     Over temp. cut-off
Alarm: Auto audio alarm mute, Mute time programmable
Safety alarms: ON LED
The mentioned are default limit, can be set or alter as per requirement:
1.  Skin High 0.5˚C
2. Skin Low 0.5˚C
3. Under range (<34˚C)
4. Over range (>38˚C)
5. Heater Failure
6. Power control failure
7. Probe and power failure alarm

This is mobile Warmer mounted on wheels with fixed baby cradle.
Mechanical Specification
Heater Box
› Consists of Ceramic Infra Red Heater 650 Watts.
› The source box can be swiveled to take X-ray
› Due to temp. insulated cover on the heater box, its exterior surface remains cool even after long run
› The construction of the stainless steel reflector and guard rail is such that the complete cleaning of heater & reflector is possible without any electrical shock hazards
Halogen Examination Lamp (12 Volts, 50 Watts)
To provide accurate assessment of Infant colour and sufficient illumination during procedures
Baby Tray (Stainless Steel)
› Clear acrylic collapsible side panels
› Stainless steel baby tray with transparent slot to Incorporate the facility of undersurface phototherapy
› Acrylic tray and cushion mattress with head up/down facility
› Acrylic X-ray tray with X-ray guide for positioning the cassette
› The design aspects also allow easy of dismantling baby care area during cleaning or fumigation
Essential Attachments
› 2 Lower Shelves
› Side Mounted Monitor tray, Pole for Syringe Pump / Infusion Pump & S.S. IV Stand.
For Skin / Air / Manual mode, following are the feature:
Control Modes: Skin / Air / Manual
Range: Skin control: 34 to 38 ˚C
Air control: Room temp. to 39˚ C"
Resolution: 0.1˚ C
Accuracy: ± 0.2˚ C
Display: 1” bright skin & air temp.(7 segment LED)
            % of heater output (bar graph)"
Status: On LCD
Control Mode &Set temp
Timer: Timer / APGAR Timer/Baby Attend
Manual mode: Time Programmable
                     Heater output settable
                     Over temp. cut-off
Alarm: Auto audio alarm mute, Mute time programmable
Safety alarms: ON LCD
The mentioned are default limit, can be set or alter as per requirement:
1. Skin Mode
    - Skin High 0.5˚C
    - Skin Low 0.5 ˚ C
    - Under range (<34˚C)
    - Over range (>38˚C)
2. Air Mode
    - Air high 1.5˚C
    - Low 3.0˚C
    - Over range
3. Heater Failure
4. Power Control Failure
5. Probe & Power failure alarm

This is mobile Warmer Stand mounted on wheels.
Mechanical Specification
Heater Box
• Consists of Ceramic Infra Red Heater 650 Watts.
• The source box can be swiveled to take X-ray
• Due to temp. insulated cover on the heater box, its exterior surface remains cool even after long run
• The construction of the stainless steel reflector and guard rail is such that the complete cleaning of heater & reflector is possible without any electrical shock hazards
Technical Specification   
Heater Box
• Consists of Ceramic Infra Red Heater 650 Watts.
• The source box can be swivelled to take X-ray
• Due to temp. insulated cover on the heater box, its exterior surface remains cool even after long run
• The construction of the stainless steel reflector and guard rail is such that the complete cleaning of heater & reflector is possible without any electrical shock hazards.
Halogen Examination Lamp (12 Volts, 50 Watts)
To provide accurate assessment of Infant colour and sufficient illumination during procedures
Essential Attachments
• Side Mounted Monitor tray, Pole for Syringe Pump / Infusion Pump
• S.S. IV Stand.
For Skin /  Manual mode, following are the feature:
Control Modes: Skin / Manual
Range: Skin control: 34 to 38 ˚C
Resolution: 0.1˚ C
Accuracy: ± 0.2˚ C
Display: 1” bright skin & air temp.(7 segment LED)
            % of heater output (bar graph)"
Status: On LED
Timer: Timer / APGAR
Manual mode: Time Programmable
                     Heater output settable
                     Over temp. cut-off
Alarm: Auto audio alarm mute, Mute time programmable
Safety alarms: ON LED
The mentioned are default limit, can be set or alter as per requirement:
1.  Skin High 0.5˚C
2. Skin Low 0.5˚C
3. Under range (<34˚C)
4. Over range (>38˚C)
5. Heater Failure
6. Power control failure
7. Probe and power failure alarm

This is mobile Warmer Stand mounted on wheels.
Mechanical Specification
Heater Box
• Consists of Ceramic Infra Red Heater 650 Watts.
• The source box can be swiveled to take X-ray
• Due to temp. insulated cover on the heater box, its exterior surface remains cool even after long run
• The construction of the stainless steel reflector and guard rail is such that the complete cleaning of heater & reflector is possible without any electrical shock hazards
Technical Specification   
Heater Box
• Consists of Ceramic Infra Red Heater 650 Watts.
• The source box can be swivelled to take X-ray
• Due to temp. insulated cover on the heater box, its exterior surface remains cool even after long run
• The construction of the stainless steel reflector and guard rail is such that the complete cleaning of heater & reflector is possible without any electrical shock hazards.
Halogen Examination Lamp (12 Volts, 50 Watts)
To provide accurate assessment of Infant colour and sufficient illumination during procedures
Essential Attachments
• Side Mounted Monitor tray, Pole for Syringe Pump / Infusion Pump
• S.S. IV Stand.
For Skin / Air / Manual mode, following are the feature:
Control Modes: Skin / Air / Manual
Range: Skin control: 34 to 38 ˚C
Air control: Room temp. to 39˚ C"
Resolution: 0.1˚ C
Accuracy: ± 0.2˚ C
Display: 1” bright skin & air temp.(7 segment LED)
            % of heater output (bar graph)"
Status: On LCD
Control Mode &Set temp
Timer: Timer / APGAR Timer/Baby Attend
Manual mode: Time Programmable
                     Heater output settable
                     Over temp. cut-off
Alarm: Auto audio alarm mute, Mute time programmable
Safety alarms: ON LCD
The mentioned are default limit, can be set or alter as per requirement:
1. Skin Mode
    - Skin High 0.5˚C
    - Skin Low 0.5 ˚ C
    - Under range (<34˚C)
    - Over range (>38˚C)
2. Air Mode
    - Air high 1.5˚C
    - Low 3.0˚C
    - Over range
3. Heater Failure
4. Power Control Failure
5. Probe & Power failure alarm

This is mobile Warmer Stand mounted on wheels with infant care trolley (Premium).
Mechanical Specification
Heater Box
• Consists of Ceramic Infra Red Heater 650 Watts.
• The source box can be swiveled to take X-ray
• Due to temp. insulated cover on the heater box, its exterior surface remains cool even after long run
• The construction of the stainless steel reflector and guard rail is such that the complete cleaning of heater & reflector is possible without any electrical shock hazards
Technical Specification   
Heater Box
• Consists of Ceramic Infra Red Heater 650 Watts.
• The source box can be swivelled to take X-ray
• Due to temp. insulated cover on the heater box, its exterior surface remains cool even after long run
• The construction of the stainless steel reflector and guard rail is such that the complete cleaning of heater & reflector is possible without any electrical shock hazards.
Halogen Examination Lamp (12 Volts, 50 Watts)
To provide accurate assessment of Infant colour and sufficient illumination during procedures
Essential Attachments
• Side Mounted Monitor tray, Pole for Syringe Pump / Infusion Pump
• S.S. IV Stand.
Infant Care Trolley Premium
• Clear acrylic collapsible side panels to assess an infant from all sides
• Stainless steel baby tray with transparent slot to incorporate the facility of under surface phototherapy
• Acrylic tray and cushion mattress with head up/down facility
• Acrylic X-ray tray with X-ray guide for positioning the cassette
• Two Lower shelves
• Mounted on wheel 4"
• The design aspects also allow easy of dismantling baby care area during cleaning or fumigation
For Skin /  Manual mode, following are the feature:
Control Modes: Skin / Manual
Range: Skin control: 34 to 38 ˚C
Resolution: 0.1˚ C
Accuracy: ± 0.2˚ C
Display: 1” bright skin & air temp.(7 segment LED)
            % of heater output (bar graph)"
Status: On LED
Timer: Timer / APGAR
Manual mode: Time Programmable
                     Heater output settable
                     Over temp. cut-off
Alarm: Auto audio alarm mute, Mute time programmable
Safety alarms: ON LED
The mentioned are default limit, can be set or alter as per requirement:
1.  Skin High 0.5˚C
2. Skin Low 0.5˚C
3. Under range (<34˚C)
4. Over range (>38˚C)
5. Heater Failure
6. Power control failure
7. Probe and power failure alarm

This is mobile Warmer Stand mounted on wheels with infant care trolley (Premium).
Mechanical Specification
Heater Box
• Consists of Ceramic Infra Red Heater 650 Watts.
• The source box can be swiveled to take X-ray
• Due to temp. insulated cover on the heater box, its exterior surface remains cool even after long run
• The construction of the stainless steel reflector and guard rail is such that the complete cleaning of heater & reflector is possible without any electrical shock hazards
Technical Specification   
Heater Box
• Consists of Ceramic Infra Red Heater 650 Watts.
• The source box can be swivelled to take X-ray
• Due to temp. insulated cover on the heater box, its exterior surface remains cool even after long run
• The construction of the stainless steel reflector and guard rail is such that the complete cleaning of heater & reflector is possible without any electrical shock hazards.
Halogen Examination Lamp (12 Volts, 50 Watts)
To provide accurate assessment of Infant colour and sufficient illumination during procedures
Essential Attachments
• Side Mounted Monitor tray, Pole for Syringe Pump / Infusion Pump
• S.S. IV Stand.
Infant Care Trolley Premium
• Clear acrylic collapsible side panels to assess an infant from all sides
• Stainless steel baby tray with transparent slot to incorporate the facility of under surface phototherapy
• Acrylic tray and cushion mattress with head up/down facility
• Acrylic X-ray tray with X-ray guide for positioning the cassette
• Two Lower shelves
• Mounted on wheel 4"
• The design aspects also allow easy of dismantling baby care area during cleaning or fumigation
For Skin / Air / Manual mode, following are the feature:
Control Modes: Skin / Air / Manual
Range: Skin control: 34 to 38 ˚C
Air control: Room temp. to 39˚ C"
Resolution: 0.1˚ C
Accuracy: ± 0.2˚ C
Display: 1” bright skin & air temp.(7 segment LED)
            % of heater output (bar graph)"
Status: On LCD
Control Mode & Set temp
Timer: Timer / APGAR Timer/Baby Attend
Manual mode: Time Programmable
                     Heater output settable
                     Over temp. cut-off
Alarm: Auto audio alarm mute, Mute time programmable
Safety alarms: ON LCD
The mentioned are default limit, can be set or alter as per requirement:
1. Skin Mode
    - Skin High 0.5˚C
    - Skin Low 0.5 ˚ C
    - Under range (<34˚C)
    - Over range (>38˚C)
2. Air Mode
    - Air high 1.5˚C
    - Low 3.0˚C
    - Over range
3. Heater Failure
4. Power Control Failure
5. Probe & Power failure alarm"

These are mobile Warmer mounted on wheels with fixed baby cradle, lower shelf and 3 drawers storage Cabinet.
Technical Specification
Heater Box
• Consists of Ceramic Infra Red Heater 650 Watts
• Metallic overhead heater box.
• The construction of the stainless steel reflector and Guard rail is such that the complete cleaning of heater & reflector is possible without any electrical shock hazards
Halogen Examination Lamp (12 Volts, 50 Watts)
To provide accurate assessment of Infant colour and sufficient illumination during procedures
Baby Tray (Stainless Steel)
• Clear acrylic collapsible side panels
• Stainless steel baby tray with transparent slot to incorporate the facility of under surface phototherapy
• Acrylic tray and cushion mattress with head up/down facility
• Acrylic X-ray tray with X-ray guide for positioning the cassette
• The design aspects also allow easy of dismantling baby care area during cleaning or fumigation
Essential Attachments
• Lower Shelf and 3 Drawer Storage Cabinet
• S.S. IV Stand.
Temp. Controller to provide thermal regulation with highest degree of accuracy.
For Skin /  Manual mode, following are the feature:
Control Modes: Skin / Manual
Range: Skin control: 34 to 38 ˚C
Resolution: 0.1˚ C
Accuracy: ± 0.2˚ C
Display: 1” bright skin & air temp.(7 segment LED)
            % of heater output (bar graph)"
Status: On LED
Timer: Timer / APGAR
Manual mode: Time Programmable
                     Heater output settable
                     Over temp. cut-off
Alarm: Auto audio alarm mute, Mute time programmable
Safety alarms: ON LED
The mentioned are default limit, can be set or alter as per requirement:
1. Skin High 0.5˚C
2. Skin Low 0.5˚C
3. Under range (<34˚C)
4. Over range (>38˚C)
5. Heater Failure
6. Power control failure
7. Probe and power failure alarm

These are mobile Warmer mounted on wheels with fixed baby cradle, lower shelf and 3 drawers storage Cabinet.
Technical Specification
Heater Box
• Consists of Ceramic Infra Red Heater 650 Watts
• Metallic overhead heater box.
• The construction of the stainless steel reflector and Guard rail is such that the complete cleaning of heater & reflector is possible without any electrical shock hazards
Halogen Examination Lamp (12 Volts, 50 Watts)
To provide accurate assessment of Infant colour and sufficient illumination during procedures
Baby Tray (Stainless Steel)
• Clear acrylic collapsible side panels
• Stainless steel baby tray with transparent slot to incorporate the facility of under surface phototherapy
• Acrylic tray and cushion mattress with head up/down facility
• Acrylic X-ray tray with X-ray guide for positioning the cassette
• The design aspects also allow easy of dismantling baby care area during cleaning or fumigation
Essential Attachments
• Lower Shelf and 3 Drawer Storage Cabinet
• S.S. IV Stand.
Temp. Controller to provide thermal regulation with highest degree of accuracy.
For Skin / Air / Manual mode, following are the feature:
Control Modes: Skin / Air / Manual
Range: Skin control: 34 to 38 ˚C
Air control: Room temp. to 39˚ C"
Resolution: 0.1˚ C
Accuracy: ± 0.2˚ C
Display: 1” bright skin & air temp.(7 segment LED)
            % of heater output (bar graph)"
Status: On LCD
Control Mode &Set temp
Timer: Timer / APGAR Timer/Baby Attend
Manual mode: Time Programmable
                     Heater output settable
                     Over temp. cut-off
Alarm: Auto audio alarm mute, Mute time programmable
Safety alarms: ON LCD
The mentioned are default limit, can be set or alter as per requirement:
1. Skin Mode
    - Skin High 0.5˚C
    - Skin Low 0.5 ˚ C
    - Under range (<34˚C)
    - Over range (>38˚C)
2. Air Mode
    - Air high 1.5˚C
    - Low 3.0˚C
    - Over range
3. Heater Failure
4. Power Control Failure
5. Probe & Power failure alarm"