 Resuscitation Unit with Fixed Baby Cradle & Drawers (Premium) with Oxygen Regulator with hose pipe, place to keep cylinder, chain to hold oxygen cylinder, flow meter, humidifier bottle, silicone resuscitator with face masks 00, 01 & silicone airways sz. 000, 00, 0 & Laryngoscopes with miller blades sz. 0 & 1, with electrically operated suction unit with 2 autoclavable 500ml suction jar, with Microprocessor based temprature controller with 3 modes Skin/Air/Manual mode.
Technical Specification
Heater Box
› Consists of Ceramic Infra Red Heater 650 Watts,
› The source box can be swivelled to take X-ray
› Due to temp. insulated cover on the heater box, its exterior surface remains cool even after long run
› The construction of the stainless steel reflector and
› Guard rail is such that the complete cleaning of heater & reflector is possible without any electrical shock hazards
› Halogen Examination Lamp (12 Volts, 50 Watts)
› To provide accurate assessment of Infant colour and sufficient illumination during procedures
Baby Tray (Stainless Steel)
› Clear acrylic collapsible side panels
› Stainless steel baby tray with transparent slot to incorporate the facility of under surface phototherapy
› Acrylic tray and cushion mattress with head up/down facility
› Acrylic X-ray tray with X-ray guide for positioning the cassette
› The design aspects also allow easy of dismantling baby care area during cleaning or fumigation
Essential Attachments
› Lower Shelf and 3 Drawer Storage Cabinet
› Side Mounted Monitor tray
› Pole for Syringe Pump / Infusion Pump
› S.S. IV Stand.
Oxygenation : Oxygen regulator with Hose pipe, Place to keep Cylinder, Chain to hold Oxygen Cylinder, Flow meter, Humidifier bottle, Silicone Patient Tubing, Manual Silicone Resuscitator 250ml with 00 & 01 size mask.
Suction : Electrically operated low pressure Suction unit with 2 Autoclavable 500 ml suction jars, Regulator, Suction gauge and silicone tubing.
Intubation : Laryngoscope with size 0 & 1 Straight Blades, Silicone Airways 000, 00 & 0
For Skin / Air / Manual mode, following are the feature:
Control Modes: Skin / Air / Manual
Range: Skin control: 34 to 38 ˚Ce
Air control: Room temp. to 39˚ C"
Resolution: 0.1˚ C
Accuracy: ± 0.2˚ C
Display: 1” bright skin & air temp.(7 segment LED)
% of heater output (bar graph)"
Status: On LCD
Control Mode &Set temp
Timer: Timer / APGAR Timer/Baby Attend
Manual mode: Time Programmable
Heater output settable
Over temp. cut-off
Alarm: Auto audio alarm mute, Mute time programmable
Safety alarms: ON LCD
The mentioned are default limit, can be set or alter as per requirement:
1. Skin Mode
- Skin High 0.5˚C
- Skin Low 0.5 ˚ C
- Under range (<34˚C)
- Over range (>38˚C)
2. Air Mode
- Air high 1.5˚C
- Low 3.0˚C
- Over range
3. Heater Failure
4. Power Control Failure
5. Probe & Power failure alarm" | 
