CNT-16A : Brush Less Centrifuge

Technical Spefification and Features

• Capacity / Max. Speed : As per selected rotor
• Motor : Brush less Induction Motor with frequency drive.
• Controller : Microprocessor controlled and programmable for pre set RPM and pre defined time.
• Display : LCD-2 line display with back light. Display pre set RPM, actual RPM, pre defined TIME and remaining TIME.
• Lid Lock : The centrifuge will not run if door is open. The lid will lock immediately if rotor start spinning. The lid remain locked till rotor become standstill. If power supply fail then lid unlock immediately but do not open lid for few minutes.
• Speed Regulator : Programable preset RPM with ±3% accuracy.
• Imbalance : The rotation stops if rotor is imbalance and imbalance indicator LED- “ON” till restart of device.
• Thermal Protection : The motor is thermally protected.
• Brake : The device is having automatic brake with LED Indicator.

Model No.	Rotor No.	Rotor	Type of Rotor	Max. RMP	Max. RCF
CNT-16A	CNTR-01	8 TUBE x 15 ML	SWING OUT	3500	1800
CNT-16B	CNTR-09	12 TUBE x 07 ML	SWING OUT	3500	1750
CNT-16C	CNTR-07	16 TUBE x 15 ML	SWING OUT	3500	1900
CNT-16D	CNTR-10	02 TUBE x 50 ML	SWING OUT	3500	1800
CNT-16E	CNTR-11	24 TUBE x 07 ML	SWING OUT	3500	1950
CNT-16F	CNTR-12	04 TUBE x 50 ML	SWING OUT	3500	1900
CNT-17A	CNTR-02	12 TUBE x 5 ML	SWING OUT	4000	1900
CNT-17B	CNTR-08	24 TUBE x 5 ML	SWING OUT	4000	2050
CNT-17C	CNTR-13	24 TUBE x 15 ML	ANGULAR	4000	2450
CNT-18A	CNTR-03	8 TUBE x 15 ML	ANGULAR	5000	3150
CNT-18B	CNTR-04	12 TUBE x 15 ML	ANGULAR	5000	3450
CNT-18C	CNTR-05	16 TUBE x 15 ML	ANGULAR	5000	3450
CNT-18D	CNTR-06	24 TUBE x 05 ML	ANGULAR	5000	2900
CNT-18E	CNTR-14	24 TUBE x 07 ML	ANGULAR	5000	3250
CNT-19A	CNTR-14	12 Capillaries of QBC	ANGULAR	12000	15300
CNT-19B	CNTR-15	24 Capillaries - 75mm x 1mm	ANGULAR	12000	15300
CNT-19C	CNTR-16	24 TUBE x 1.5 ML / 2.0 ML	ANGULAR	12000	13500

CNT-31 : Brush Less Centrifuge

Technical Spefification and Features

• Capacity : As per selected rotor
• Max. Speed : 6000 RPM
• Motor : Brush less Induction Motor with frequency drive.
• Controller : Microprocessor controlled and programmable for pre set RPM/RCF and pre defined time.
• Display : LCD-2 line display with back light. Display actual RPM+RCF and remaining TIME.
• Lid Lock : The centrifuge will not run if door is open. The lid will lock immediately if rotor start spinning. The lid remain locked till rotor become standstill. If power supply fail then lid unlock immediately but do not open lid for few minutes.
• Speed Regulator : Programable preset RPM with ±3% accuracy.
• Imbalance : The rotation stops if rotor is imbalance and imbalance indicator LED-“ON” till restart of device.
• Thermal Protection : The motor is thermally protected.
• Brake : The device is having automatic brake with LED Indicator.

Model No.	Rotor No.	Rotor	Type of Rotor	Max. RMP	Max. RCF
CNT-31A	CNTR-07	16 TUBE x 15 ML	SWING OUT	3500	1975
CNT-31B	CNTR-10	02 TUBE x 50 ML	SWING OUT	3500	1975
CNT-31C	CNTR-11	24 TUBE x 07 ML	SWING OUT	3500	1975
CNT-31D	CNTR-12	04 TUBE x 50 ML	SWING OUT	3500	1975
CNT-31E	CNTR-01	08 TUBE x 15 ML	SWING OUT	3500	2024
CNT-31F	CNTR-02	12 TUBE x 5 ML	SWING OUT	3500	2024
CNT-31G	CNTR-09	12 TUBE x 7 ML	SWING OUT	4000	2024
CNT-31H	CNTR-08	24 TUBE x 5ML	SWING OUT	4000	2024
CNT-31I	CNTR-03	8 TUBE x 15 ML	ANGULAR	4000	3180
CNT-31J	CNTR-4	12 TUBE x 15 ML	ANGULAR	5000	3584
CNT-31K	CNTR-5	16 TUBE x 15 ML	ANGULAR	5000	3724
CNT-31L	CNTR-6	24 TUBE x 05 ML	ANGULAR	5000	2912
CNT-31M	CNTR-14	12 Capillaries of QBC	ANGULAR	13000	17982
CNT-31N	CNTR-15	24 Capillaries - 75mm x 1mm	ANGULAR	13000	17982
CNT-31O	CNTR-16	24 TUBE x 1.5 ML / 2.0 ML	ANGULAR	13000	15900
CNT-31P	CNTR-13	24 TUBE x 15 ML	ANGULAR	4000	2437

CNT-32 : Brush Less Centrifuge

Technical Spefification and Features

• Capacity : As per selected rotor
• Max. Speed : 13000 RPM
• Motor : Brush less Induction Motor with frequency drive.
• Controller : Microprocessor controlled and programmable for pre set RPM/RCF and pre defined time.
• Display : LCD-2 line display with back light. Display actual RPM+RCF and remaining TIME.
• Lid Lock : The centrifuge will not run if door is open. The lid will lock immediately if rotor start spinning. The lid remain locked till rotor become standstill. If power supply fail then lid unlock immediately but do not open lid for few minutes.
• Speed Regulator : Programable preset RPM with ±3% accuracy.
• Imbalance : The rotation stops if rotor is imbalance and imbalance indicator LED- “ON” till restart of device.
• Thermal Protection : The motor is thermally protected.
• Brake : The device is having automatic brake with LED Indicator.

Model No.	Rotor No.	Rotor	Type of Rotor	Max. RMP	Max. RCF
CNT-32A	CNTR-07	16 TUBE x 15 ML	SWING OUT	3500	1975
CNT-32B	CNTR-10	02 TUBE x 50 ML	SWING OUT	3500	1975
CNT-32C	CNTR-11	24 TUBE x 07 ML	SWING OUT	3500	1975
CNT-32D	CNTR-12	04 TUBE x 50 ML	SWING OUT	3500	1975
CNT-32E	CNTR-01	08 TUBE x 15 ML	SWING OUT	3500	2024
CNT-32F	CNTR-02	12 TUBE x 5 ML	SWING OUT	3500	2024
CNT-32G	CNTR-09	12 TUBE x 7 ML	SWING OUT	4000	2024
CNT-32H	CNTR-08	24 TUBE x 5ML	SWING OUT	4000	2024
CNT-32I	CNTR-03	8 TUBE x 15 ML	ANGULAR	4000	3180
CNT-32J	CNTR-4	12 TUBE x 15 ML	ANGULAR	5000	3584
CNT-32K	CNTR-5	16 TUBE x 15 ML	ANGULAR	5000	3724
CNT-32L	CNTR-6	24 TUBE x 05 ML	ANGULAR	5000	2912
CNT-32M	CNTR-14	12 Capillaries of QBC	ANGULAR	13000	17982
CNT-32N	CNTR-15	24 Capillaries - 75mm x 1mm	ANGULAR	13000	17982
CNT-32O	CNTR-16	24 TUBE x 1.5 ML / 2.0 ML	ANGULAR	13000	15900
CNT-32P	CNTR-13	24 TUBE x 15 ML	ANGULAR	4000	2437

CNT-33 : Small Brushless Centrifuge

Technical Specification and Features

• Rotor : Swing out Type Horizontal 8 x 15 Angle Head Rotor
• Motor : Brushless Motor Maintainance Free.
• Max. Speed : 4000 RPM
• Timer : Digital (1 to 30 Minutes)
• Digital Display : LCD display of RPM, RCF, Time

Hematocrit Centrifuge (with digital timer & digital RPM)

Centrifuge Auto Stop

Brush Less Centrifuge And Rotors

Technical Spefification and Features

• Capacity, Max. Speed : A s per selected rotor.
• Motor : Brush less Induction Motor with frequency drive.
• Controller : Microprocessor controlled and programmable for pre set RPM and pre defined time.
• Display : LCD-2 line display with back light. Display pre set RPM, actual RPM, pre defined TIME and remaining TIME.
• Lid Lock : The centrifuge will not run if door is open. The lid will lock immediately if rotor start spinning. The lid remain locked till rotor become standstill. If power supply fail then lid unlock immediately but do not open lid for few minutes.
• Speed Regulator : Programable preset RPM with ±3% accuracy.
• Imbalance : The rotation stops if rotor is imbalance and imbalance indicator LED- “ON” till restart of device.
• Thermal Protection : The motor is thermally protected.
• Brake : The device is having automatic brake with LED Indicator.

Model No.	Rotor No.	Rotor	Type of Rotor	Max. RMP	Max. RCF
CNT-16	CNTR-01	8 TUBE x 15 ML	SWING OUT	3500	1800
	CNTR-09	12 TUBE x 07 ML	SWING OUT	3500	1750
	CNTR-07	16 TUBE x 15 ML	SWING OUT	3500	1900
	CNTR-10	02 TUBE x 50 ML	SWING OUT	3500	1800
	CNTR-11	24 TUBE x 07 ML	SWING OUT	3500	1950
	CNTR-12	04 TUBE x 50 ML	SWING OUT	3500	1900
CNT-17	CNTR-02	12 TUBE x 5 ML	SWING OUT	4000	1900
	CNTR-08	24 TUBE x 5 ML	SWING OUT	4000	2050
	CNTR-13	24 TUBE x 15 ML	ANGULAR	4000	2450
CNT-18	CNTR-03	8 TUBE x 15 ML	ANGULAR	5000	3150
	CNTR-04	12 TUBE x 15 ML	ANGULAR	5000	3450
	CNTR-05	16 TUBE x 15 ML	ANGULAR	5000	3450
	CNTR-06	24 TUBE x 05 ML	ANGULAR	5000	2900
	CNTR-14	24 TUBE x 07 ML	ANGULAR	5000	3250
CNT-19	CNTR-14	12 Capillaries of QBC	ANGULAR	12000	15300
	CNTR-15	24 Capillaries - 75mm x 1mm	ANGULAR	12000	15300
	CNTR-16	24 TUBE x 1.5 ML / 2.0 ML	ANGULAR	12000	13500